Skip to content

OriginOil’s CLEAN-FRAC™ Water Treatment System Yields Successful First Field Results

Technology for cleaning frack and produced water removed up to 99% of organic materials in initial field tests at California oil well

Los Angeles, California – February 28, 2013 – OriginOil, Inc. (OTCBB: OOIL), the developer of a breakthrough energy production process for the oil and algae industries, today announced its CLEAN-FRAC™ water treatment system for the oil and gas industry successfully completed its first field testing on produced water at an oil well in Lost Hills near Bakersfield, California.

The field trials demonstrated that the process removes almost all organics, suspended solids and bacteria from produced water, demonstrating the potential impact of OriginOil’s technology in enabling oil operators to extract more petroleum from process water and reduce fresh water use. A video documenting the success of OriginOil’s Mobile Lab is available at

Les Cufaude and Dale Hankins of Pacific Coast Exploration hosted the testing and were surprised that the system was able to recover as much oil from the water as it did. Until now, they had believed that their produced water was almost entirely oil free. Cufaude remarked on how much more oil the company could recover and sell.  Hankins, a 40-year industry veteran, stated, “I see many applications for your technology in the oil patch. OriginOil has a winner here.”

“These first field trials confirmed what we’ve seen in the lab— up to a 99% reduction of organics in a matter of minutes,” said Riggs Eckelberry, OriginOil’s Chief Executive Officer. “This marks a major milestone as we refine and scale our technology for commercial deployment in the oil and gas industry. By increasing the amount of recoverable oil for producers, we have the potential for a compelling economic benefit. We now plan to take this equipment to Texas for similar demonstrations in San Antonio and Houston in late March.”

The CLEAN-FRAC system is a chemical free, continuous process that employs low-energy technologies to decontaminate produced or ‘frac flowback’ water. It is the first stage of any multi-stage water treatment system designed for recycling or purifying to drinking water.

Bill Charneski, General Manager of the Oil & Gas Division, described the experience, “Through our Industry Advisor, Dr. Gerald Bailey, we secured an oil well in Lost Hills as a test site. The well’s produced water was fairly contaminated with a heavy crude oil and drilling residues. From the first test, there was significant separation of the oil and solids from the water. Testing of our product showed that organics, measured by Chemical Oxygen Demand (COD), were reduced by as much as 99%. Even more surprisingly, we eliminated Total Suspended Solids (TSS), also known as turbidity, by as much as 98%.  We are extremely pleased with the results of this first field test.”

To view a video of the CLEAN-FRAC™ system in operation in Lost Hills, visit For more information on the field trails and CLEAN-FRAC, please contact

According to The National Energy Technology Laboratory (NETL), produced water is water trapped in underground formations that is brought to the surface along with oil or gas.  It may include water from the reservoir, water injected into the formation, and any chemicals added during the production and treatment processes.  In the United States, the water to oil ratio (WOR) averages seven barrels of water to one of oil. In the worst cases, the WOR reaches 50 to 1. The petroleum must be efficiently reclaimed from this water, and the water itself must be cleaned. According to “The Produced Water Gamechanger Report 2010 – 2014,” the market for topside produced water reinjection, which is emerging as the preferred method of water management, is around $9.8 billion over the period covered by the report.

Safe Harbor Statement:

Matters discussed in this update contain forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. When used in this update, the words "anticipate," "believe," "estimate," "may," "intend," "expect" and similar expressions identify such forward-looking statements. Actual results, performance or achievements could differ materially from those contemplated, expressed or implied by the forward-looking statements contained herein, and while expected, there is no guarantee that we will attain the aforementioned anticipated developmental milestones. These forward-looking statements are based largely on the expectations of the Company and are subject to a number of risks and uncertainties. These include, but are not limited to, risks and uncertainties associated with: the impact of economic, competitive and other factors affecting the Company and its operations, markets, product, and distributor performance, the impact on the national and local economies resulting from terrorist actions, and U.S. actions subsequently; and other factors detailed in reports filed by the Company.

Return to Announcements»

Like this story?
Share this on Facebook!